Silvio Klaic's Forum

Electronics => IC Tester device (Public) => Topic started by: Silvio Klaic on October 28, 2010, 12:04:08 AM

Title: FAQ
Post by: Silvio Klaic on October 28, 2010, 12:04:08 AM
Frequently Asked Questions.

I’ll put here some answers that can be interesting to others.

Q: can this tester be also used for 14pins only?
A: You can use parts with any number of pins from 2 to 16.
Just make sure when you use smaller casing like Dil 14 to place pin 1 to socket pin 1.
This is because testing data are written to start form socket pin 1.